Tecno F1 firmware

F1-VP510EFG-GO-181123V6

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.8
Will be used loader: DA_SWSEC.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now…
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected…Please wait
Sending DA agent, please wait…
—————————————————-
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
—————————————————-
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
—————————————————-
EMMC: (57Gb+8192Mb) KSI 0x454838454538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454838454538 : 00000000000000
EMMC UA SIZE: 0x1c8000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1c8c00000 [7.137 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM9)
Build ID: O11019
Display ID: F1-VP510EFG-GO-181123V6
Version: 8.1.0
Build Date: 2018ه¹´ 11وœˆ 23و—¥ وکںوœںن؛” 16:14:20 CST
Build Date: 1542960860
Model: TECNO F1
Brand: TECNO
Device: TECNO-F1-PRO
Manufacturer: TECNO MOBILE LIMITED

 

حسن ابوعلم
حسن

This content is restricted to subscribers

 
 
 
 

Author: Hulk_GSM

5 thoughts on “Tecno F1 firmware

Comments are closed.