china phone

الى فى اى مكان مدفوع عند المطورين مجانى IBRIT Speed X

MT6737M_EMMC_NRD90M__7_0_SpeedX_iBRIT_2019_06_24_19_15)

انفو

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.0.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now…
Detected : MediaTek PreLoader USB VCOM_V1632 (Android) (COM31)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected…Please wait
Sending DA agent, please wait…
—————————————————-
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
—————————————————-
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
—————————————————-
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM44)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jun 6 21:00:52 CST 2018
Model: SpeedX
Display ID: iBRIT_SI53_V09_20180529
Brand: iBRIT
Device: SpeedX
Manufacturer: iBRIT
Region: GB
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp1-V1.0.2_bd6737m.35g.a.n
This phone have FRP partition.
IMEI[1] : halmy
IMEI[2] : halmy
Wait untill phone will start charging.
[0] All done.

1- الفلاشة

هنا

2 ملفات الحماية

هنا

3- ملف nv

هنا

 

الوسوم

اترك تعليقاً

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *

زر الذهاب إلى الأعلى
إغلاق